|
Technical Specifications
- Wavelengths: 1310 nm +/- 25 nm 1550 nm,+/- 30 nm
- Compatible fiber types: Single Mode
- OTDR Port Connector: Cleanable UPC ferrule with removable SC adapter
- Event dead zone 1: 850 nm: 0.5 m (typical), 1300 nm: 0.7 m (typical), 1310 nm: 0.6 m(typical), 1550 nm: 0.6 m (typical)
- Attenuation dead zone 2: 850 nm: 2.5 m (typical), 1300 nm: 4.5 m (typical), 1310 nm: 3.6 m(typical), 1550 nm: 3.7 m (typical)
- Dynamic range 3,5, 6: 850 nm: 28 dB (typical), 1300 nm: 30 dB (typical), 1310 nm: 32dB (typical), 1550 nm: 30 dB (typical)
- Max distance range setting: MM: 40 km, SM: 130 km
- Distance measurement range 4, 5, 7, 8, 9, 10: 850 nm: 9 km, 1300 nm: 35 km, 1310 nm: 80 km, 1550 nm: 130km
- Reflectance range 4, 5: 1310 nm:850 nm: -14 dB to -57 dB (typical), 1300 nm: -14 dB to -62 dB (typical), 1310 nm: -14 dB to -65 dB (typical), 1550 nm: -14 dB to -65 dB (typical)
- Sample resolution: 3 cm to 400 cm
- Pulse widths (nominal): 850 nm: 3, 5, 20, 40, 200 ns, 1300 nm: 3, 5, 20, 40, 200, 1000ns, 1310/1550 nm: 3, 10, 30, 100, 300, 1000, 3000, 10000, 20000 ns
|
|
General Specifications
-Operating temperature :- -18º C to 45º C
-Non-operating temperature :- -30º C to 60º C
-Operating altitude :- 4,000 m (13,123 ft), 3,200 m (10,500 ft) with AC adapter
-Storage altitude :- 12,000 m
-EMC :- EN 61326-1
-FiberInspector probe specifications :-
•Magnification ~ 200X with OptiFiber Pro Display
•Light source :- Blue LED
•Power source :- Versiv Mainframe
•Field of View (FOV) Horizontal: 425 µm, Vertical: 320 µm
•Minimum detectable particle size :- 0.5 µm
-VFL specifications
•On/Off control :- Mechanical switch and a button on the touch screen
•Output power:- 316 µW (-5 dBm) = peak power = 1.0 mW (0 dBm)
•Operating wavelength :- 650 nm nominal
•Spectral width :- (RMS) ±3 nm
|